Clinical dental management of the head and neck irradiated patient: topics of interest for clinicians

To discuss important topics regarding the dental procedures performed in patients before, during and after the radiotherapy treatment. The biological effects of ionizing radiation on bone tissue focusing on clinical care will be described. The invasive and not invasive procedures after radiotherapy treatment in the head and neck region will be addressed using scientific evidences to determine the appropriate moment for tooth extractions, periodontal management, and preventive procedures for osteoradionecrosis. Methods: Thirty-three studies including original studies and reviews were selected in MEDLINE database (PubMed). No year of publication restriction was applied. Language was restricted to the English, and the following Medical Subject Heading terms were used: radiotherapy, osteoradionecrosis, dental management. Studies of osteoradionecrosis involving clinical management of irradiated patients, with an emphasis on updated guidelines and protocols were selected. Results: Care in dental procedures were related about restorative treatment, endodontic treatment, rehabilitation for edentulous regions using prostheses and implants and periodontal procedures before, during and after RTX treatment. Conclusions: The dental procedures should and can be performed before, during but also after radiotherapy. However, the clinical procedures should be less invasive as possible. A maintenance plan that reduces the necessity for major and more invasive treatments after radiotherapy is recommended

Root coverage with platelet-rich fibrin or connective tissue graft: a split-mouth randomized trial

Abstract: This study aimed to compare the use of connective tissue grafts (CTG) and platelet-rich fibrin (PRF) associated with the tunnel technique (TT) for the treatment of multiple gingival recessions (GR). Fourteen patients with multiple bilateral GR [type 1 recession (RT 1)] in the maxillary incisors, canines, and/or premolars were included. The TT was performed on both sides (split-mouth model); CTG (36 GR) was used on one side, and on the other, PRF (36 GR) was used. Clinical parameters, including recession depth (RD), probing depth, clinical attachment level (CAL), and keratinized gingiva thickness/width (GT/KTW), were obtained at baseline and after 1, 3, 6, and 16 months. Lower RD (0.81 ± 0.68 vs. 1.23 ± 0.71 mm) and CAL (2.54 ± 0.63 vs. 2.73 ± 0.82 mm) were observed for CTG compared to PRF after 16 months. Higher GT was obtained for CTG compared to PRF after 3 (1.81 ± 0.56 vs 1.43 ± 0.47 mm) and 6 months (1.67 ± 0.61 vs. 1.38 ± 0.55 mm, p < 0.05). The recession coverage (RC) was higher for CTG (55.42% ± 37.14) in comparison to PRF (29.53% ± 34.08) after 16 months (p < 0.05). Similarly, CTG presented a more complete coverage of the recession (15; 41.66%) than PRF (9; 24.32%). There were no significant differences between the groups in terms of surgery time, postoperative pain, or healing patterns. Greater esthetic satisfaction was obtained with CTG. It was concluded that CTG combined with TT showed clinical and esthetic results superior to those of PRF in multiple GR treatments.

Effect of micro-CT acquisition parameters and individual analysis on the assessment of bone repair

Abstract This study aimed to investigate whether two acquisition parameters, voxel size and filter thickness, used in a micro-computed tomography (micro-CT) scan, together with the examiner's experience, influence the outcome of bone repair analysis in an experimental model. Bone defects were created in rat tibiae and scanned using two voxel sizes of 6- or 12-µm and two aluminum filter thickness of 0.5- or 1-mm. Then, bone volume fraction (BV/TV) and trabecular thickness (Tb.Th) were analyzed twice by two groups of operators: experienced and inexperienced examiners. For BV/TV, no significant differences were found between scanning voxel sizes of 6 and 12 µm for the experienced examiners; however, for the inexperienced examiners, the analysis performed using a 12-µm voxel size resulted in higher BV/TV values (32.4 and 32.9) than those acquired using a 6-µm voxel size (25.4 and 24.8) (p < 0.05). For Tb.Th, no significant differences between the analyses performed by experienced and inexperienced groups were observed when using the 6-µm voxel size. However, inexperienced examiners' analysis revealed higher Tb.Th values when using the 12-µm voxel size compared with 6 µm (0.05 vs. 0.03, p < 0.05). Filter thickness had no influence on the results of any group. In conclusion, voxel size and operator experience affected the measured Tb.Th and BV/TV of a region with new bone formation. Operator experience in micro-CT analysis is more critical for BV/TV than for Tb.Th, whereas voxel size significantly affects Tb.Th evaluation. Operators in the initial phases of research training should be calibrated for bone assessments.

Use of platelet-rich fibrin for bone repair: a systematic review and meta-analysis of preclinical studies

Abstract This systematic review evaluated the potential utility of platelet-rich fibrin (PRF) in bone repair in animals. The question is: can the use of PRF in bone defects in healthy rats induce bone repair compared to clot? This systematic review was conducted in accordance with the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (Prisma). The protocol was registered with Prospero (CRD [42020162319]). The literature search involved nine databases, including grey literature. All studies evaluated the bone defects created in rats filled with PRF and clots (control). Biomaterial evaluation was also performed in this study. The risk of bias was assessed using the Systematic Review Center for Laboratory Animal Experimentation (Syrcle) tool for animal studies. A meta-analysis of quantitative data was performed to estimate the effect of PRF on bone repair in rats. Heterogeneity among the studies was assessed using the I2 statistic. The literature search retrieved 685 studies, 10 of which fulfilled the eligibility criteria, and 4 were included in the quantitative assessment. Analysis of the risk of bias revealed that most studies had a high risk of bias in performance and detection. Meta-analysis yielded divergent results and the absence of a statistically significant effect: PRF with control (standardized mean difference 2.54, 95% confidence interval -0.80-5.89; p = 0.14). In general, study heterogeneity was high (I2 ≥ 75.0%). The quality of the studies that influenced the conclusion of the review was based on the PICO, the sources and form of the search, the study selection criteria, the form of evaluation of publication bias, the evaluation of the quality of the studies, and data extraction by two researchers. PRF did not provide significant benefits for bone repair, resulting in unpredictable effects.

Ozone disinfection for viruses with applications in healthcare environments: a scoping review

Abstract The aim of this scoping review was to provide sufficient information about the effectiveness of ozone gas in virus inactivation of surfaces and objects under different environmental conditions. The review was performed according to the list of PRISMA SrC recommendations and the JBI Manual for Evidence Synthesis for Scoping Reviews. The review was registered in Open Science Framework (OSF). EMBASE (Ovid), Lilacs, LIVIVO, MEDLINE (PubMed), SciELO, Scopus and Web of Science were primary sources, and "gray literature" was searched in OpenGray and OpenThesis. A study was included if it reported primary data on the effect of ozone gas application for vehicle-borne and airborne virus inactivation. No language or publication date restriction was applied. The search was conduct on July 1, 2020. A total of 16,120 studies were screened, and after exclusion of noneligible studies, fifteen studies fulfilled all selection criteria. Application of ozone gas varied in terms of concentration, ozone exposure period and the devices used to generate ozone gas. Twelve studies showed positive results for inactivation of different virus types, including bacteriophages, SARS-CoV-2 surrogates and other vehicle-borne viruses. Most of the studies were classified as unclear regarding sponsorship status. Although most of the population has not yet been vaccinated against COVID-19, disinfection of environments, surfaces, and objects is an essential prevention strategy to control the spread of this disease. The results of this Scoping Review demonstrate that ozone gas is promising for viral disinfection of surfaces.

Fatores de risco para reintubação na unidade de terapia intensiva de um hospital de trauma / Risk factors for reintubation in the intensive care unit of a trauma hospital

A ventilação mecânica (VM) é um recurso frequentemente utilizado na Unidade de Terapia Intensiva (UTI). No entanto, a necessidade de reintubação após a retirada do suporte ventilatório está associada a desfechos desfavoráveis. Os objetivos deste estudo foram identificar possíveis fatores de risco e desfecho clínico de pacientes reintubados na UTI de um hospital referência em trauma. Foi realizado um estudo de coorte prospectivo no período de 4 meses com pacientes adultos internados na UTI e que permaneceram em VM por pelo menos 24 horas. A amostra foi composta por 100 pacientes divididos em grupo de pacientes não reintubados e pacientes que cursaram com necessidade de retornar à VM. Foram reintubados 27 pacientes, 18 deles reintubados em até 48 horas após extubação. A idade, diabetes, obesidade, tempo de VM até a extubação e frequência respiratória (FR) foram variáveis que apresentaram diferença estatisticamente significativa entre grupos (p < 0,05), porém não puderam ser apontadas como fatores de risco independentes de retorno à ventilação. A reintubação foi associada à necessidade de traqueostomias (TQT) (p < 0,001), maior tempo de permanência em VM (p < 0,001), internação prolongada na UTI (p < 0,001) e mortalidade (p < 0,005). Idade, presença de diabetes, obesidade, maior tempo de VM e FR pré-extubação mais elevada foram as variáveis relacionadas à reintubação. Este evento foi diretamente associado a piores desfechos como necessidade de TQT, maior dependência de VM, internação prolongada na UTI e mortalidade. (AU)

Effect of handpiece light and material used in pulp chamber on dentin removal during root canal retreatment

Abstract This study evaluated the effect of the use of glass ionomer cement (GIC) and flowable bulk-fill resin composite (BFRC) for filling pulp chambers and the type of high-speed handpiece light used on dentin removal during access preparation for endodontic retreatment in molar teeth. Twenty maxillary molars were treated endodontically. BFRC (Opus Bulk Fill Flow APS, FGM) was used to fill the pulp chamber and replace coronal dentin (n = 10). In the remaining teeth, the pulp chamber was filled with GIC (Maxion R, FGM). Conventional resin composite (Opallis, FGM) was used to restore the enamel layer in all teeth. The samples in each group were divided into two subgroups, and the root canals were reaccessed using a handpiece with white or ultraviolet light. The teeth were scanned using micro-CT before and after root canal reaccess. The dentin volume removed was calculated and analyzed using 2-way analysis of variance and Tukey's test (α = 0.05). The crown and pulp chamber locations with dentin removal are described using frequency distribution. During the access, fewer pulp chamber walls were affected and a lower volume of dentin was removed from the pulpal floor in the group restored with GIC than in the group restored with BFRC. No effect was observed on the coronal dentin walls with respect to the filling protocols and type of light used. For dentin removal from the pulp chamber, handpieces with white light performed better than those with ultraviolet light, irrespective of the filling protocol used. The use of GIC to fill the pulp chamber and use of white handpiece light reduced dentin removal from the pulpal floor and resulted in fewer affected dentin walls.

Resumo Este estudo avaliou os efeitos do cimento de ionômero de vidro (GIC) e da resina composta fluida bulk fill (BFRC) usados como preenchimento da câmara pulpar; e o tipo de iluminação das turbinas de alta rotação na remoção dentinária após cavidades de acesso para retratamento endodôntico em dentes molares. Vinte molares superiores foram tratados endodonticamente. Dez dentes foram restaurados usando BFRC (Opus Bulk Fill Flow APS, FGM) para preencher a câmara pulpar e dentina coronária; e resina composta convencional (Opallis, FGM) para restaurar a camada de esmalte. Os outros dentes foram restaurados usando GIC (Maxion R, FGM) para preencher a câmara pulpar e resina composta (Opallis, FGM). As amostras foram divididas em dois grupos e os canais radiculares foram novamente acessados com turbina de alta-rotação com iluminação branca ou ultravioleta. Os dentes foram escaneados usando micro-CT antes e após o novo acesso ao canal radicular. O volume de dentina removida foi calculado e os dados foram analisados por ANOVA bidirecional e teste de Tukey (α=0,05). As regiões na coroa e na câmara pulpar que apresentaram dentina removida no acesso dos canais foram descritas por meio de distribuição por frequência. A reabertura do canal radicular com GIC resultou em menos paredes afetadas da câmara pulpar e menor volume de dentina removida no assoalho. Nenhum efeito foi observado nas paredes de dentina coronária considerando aos protocolos de preenchimento. A turbina de alta rotação com iluminação branca reduziu a remoção de dentina da câmara pulpar, independentemente do protocolo de restauração utilizado. O uso de turbina de alta rotação com iluminação branca e GIC para preencher a câmara pulpar reduziram a remoção de dentina do assoalho e afetaram menos paredes dentinárias.

Influence of bone defect position and span in 3-point bending tests: experimental and finite element analysis

Abstract: Three-point bending test is the most common mechanical test used for quantifying the biomechanical quality of bone tissue and bone healing in small animals. However, there is a lack of standardization for evaluation of bone repair by cortical perforation. The aim of this study was to determine the influence of bone defect position in the proximal metaphysis of rat tibias during load application and different span configuration on the three-point bending test outcomes. Cortical defects with 1.6 mm diameter were created at a standardized location on the medial surface of 60 tibias of male Wistar rats. The animals were euthanized 7 days after surgery. Five specimens were used to create 3D models for finite element analysis using high-resolution micro-CT images. Two spans (6 and 10mm) and three positions of the bone defect in relation to the load application (upward, frontal and downward) were evaluated experimentally (n = 10) and in finite element analysis (n = 5). Maximum load (N) and stiffness (N/mm) were statistically analyzed with 2-way ANOVA and Tukey test (α = 0.05). The results demonstrated that span and orientation of the bone defect significantly influenced the fracture pattern, stress distribution and force versus displacement relation. Therefore, reliable outcome can be achieved creating the bone defect at 8 mm from the extremity of the proximal epiphysis; placing a 10 mm distance span and downward facing defect position to allow a better distribution of stress and more fracture patterns that reached the bone defect target area with less intra-group variability.

Effect of irrigation protocols on root canal wall after post preparation: a micro-CT and microhardness study

Abstract: The aim of this study was to investigate the effects of different post space irrigation protocols for removing residual filling material from dentin walls, by using microcomputed tomography (micro-CT), and the influence of these protocols on dentin microhardness. Bovine incisors (n = 35) were filled with the single-cone technique and MTA Fillapex (Angelus, Londrina, PR, Brazil). Post space preparation (PSP) was performed 7 days after filling, using the Odous Touch electrical system (Odous De Deus Ind. e Com., Belo Horizonte, MG, Brazil), followed by post space irrigation using manual irrigation, passive ultrasonic irrigation, or Easy Clean, together with 2.5% sodium hypochlorite (NaOCl), or with 2.5% NaOCl and 17% EDTA (NaOCl/EDTA). Micro-CT scans were performed at three time points. The residual filling material was evaluated at three levels: cervical, middle and apical. The Knoop test was measured with four indentations around the canal lumen at three dentin depths: X (100 μm), Y (200 μm) and Z (400 μm). Statistical analysis was performed using ANOVA (p < 0.05). The effects of the activation method (p < 0.001), and the root level (p = 0.013), as well as the interaction between the irrigant and the activation method (p = 0.041), led to different percentages of residual filling material. Lower amounts of residual filling material were observed at the cervical versus the middle and apical levels (p < 0.05). No significant differences were observed in dentin microhardness (p > 0.05). The best removal of the residual filling material was performed using the Easy Clean tip and NaOCl/EDTA, regardless of the activation methods.

Direct resin composite restoration of endodontically-treated permanent molars in adolescents: bite force and patient-specific finite element analysis

Abstract Objective To evaluate the influence of three levels of dental structure loss on stress distribution and bite load in root canal-treated young molar teeth that were filled with bulk-fill resin composite, using finite element analysis (FEA) to predict clinical failure. Methodology Three first mandibular molars with extensive caries lesions were selected in teenager patients. The habitual occlusion bite force was measured using gnathodynamometer before and after endodontic/restoration procedures. The recorded bite forces were used as input for patient-specific FEA models, generated from cone-beam computed tomographic (CT) scans of the teeth before and after treatment. Loads were simulated using the contact loading of the antagonist molars selected based on the CT scans and clinical evaluation. Pre and post treatment bite forces (N) in the 3 patients were 30.1/136.6, 34.3/133.4, and 47.9/124.1. Results Bite force increased 260% (from 36.7±11.6 to 131.9±17.8 N) after endodontic and direct restoration. Before endodontic intervention, the stress concentration was located in coronal tooth structure; after rehabilitation, the stresses were located in root dentin, regardless of the level of tooth structure loss. The bite force used on molar teeth after pulp removal during endodontic treatment resulted in high stress concentrations in weakened tooth areas and at the furcation. Conclusion Extensive caries negatively affected the bite force. After pulp removal and endodontic treatment, stress and strain concentrations were higher in the weakened dental structure. Root canal treatment associated with direct resin composite restorative procedure could restore the stress-strain conditions in permanent young molar teeth.

Effect of ScLL and 15d-PGJ2 on viability and cytokine release in LPS-stimulated fibroblasts: an in vitro study

Abstract This study evaluated the effect of a cyclopentenone-type PG, 15-Deoxy-Δ12,14-PG J2 (15d-PGJ2), and lectin (ScLL) on the viability of human gingival fibroblasts (HGFs), and on IL-6 and TGFβ-1 release by these fibroblasts, stimulated with lipopolysaccharide (LPS). HGFs were stimulated with LPS 10 μg/ml and treated with 15d-PGJ2 1 and 2 μg/ml, and ScLL 2 and 5 μg/ml, for 1 and 3h, and then evaluated for viability by MTT assay. Supernatant was collected to detect IL-6 and TGFβ-1 release, by ELISA. Positive control was cells kept in Dulbecco's Modified Eagle's Medium, and negative control was those kept in LPS. Data were analyzed by ANOVA and Dunnett's test (α = 0.05). No significant difference was found in viability among experimental groups at 1h (p > 0.05). Percentage of ScLL 5 µg/ml viable cells was similar to that of positive control at evaluated periods (p > 0.05), whereas the other groups had lower levels than the positive control (p < 0.05). IL-6 release was statistically higher for ScLL 5 μg/ml and 15d-PGJ2 2 µg/ml at 1h, compared with the other treated groups and positive control (p < 0.05). No significant differences were found among the groups at 3h (p > 0.05), except for ScLL 2 µg/ml and 15d-PGJ2 1 µg/ml, which showed lower IL-6 release compared with that of negative control (p < 0.05). No significant difference was found among the groups for TGFβ-1 release (p > 0.05). Results indicated that ScLL 5 μg/ml did not interfere in viability, and ScLL 2 µg/ml and 15d-PGJ2 1 µg/ml demonstrated reduced IL-6 release. Tested substances had no effect on TGFβ-1 release.

The effect of a 3% hydroxyapatite paste prophylaxis after different root-scaling procedures in periodontics / Efeito da profilaxia com pasta de hidroxiapatita 3% após diferentes procedimentos de raspagem radicular na periodontia

Abstract Introduction Root-scaling procedures on the root surface show to increase root surface roughness during instrumentation. The use of a prophylactic paste reduces the roughness. Objetive This study evaluated the influence of prophylaxis paste on the surface roughness of root dentin after hand instruments (HI), ultrasonic scalers (US) and rotational instruments (RI) were applied to root surfaces. Material and method Fifty bovine roots were prepared and randomly divided into 10 groups (n=5) in which instrumentation with HI, US, or RI was carried out with or without prophylaxis using either conventional or 3% hydroxyapatite paste; additionally, a control group without treatment was included. The Ra and Rz roughness values were measured using a perfilometer. The morphological aspects of the root surfaces were analysed qualitatively by scanning electron microscopy (SEM). Data were analysed using two-way ANOVA followed by Tukey's test (α = 0.05). Result The scaling method and the prophylaxis procedure significantly influenced (p < 0.05) root surface roughness. Treatment with US and prophylaxis with 3% hydroxyapatite paste resulted in lower values ​​of Ra (0.14 µm ± 0.02 µm) and Rz (0.89 µm ± 0.18 µm) compared to the other groups. SEM analysis showed smoother and more homogeneous surfaces in the groups with prophylaxis compared to the groups without prophylaxis. There were no substantial differences between the results of applying different pastes. Conclusion The prophylaxis procedure performed with the experimental paste containing 3% hydroxyapatite reduced the roughness of root surfaces treated with HI, US and RI at the same level as the conventional prophylactic paste.

Resumo Introdução Procedimentos de raspagem na superfície radicular aumentam a rugosidade superficial durante a instrumentação. O uso de pasta profilática pode reduzir a rugosidade. Objetivo Este estudo avaliou a influência da profilaxia com pasta na rugosidade superficial da dentina radicular após instrumentação manual (IH), ultrassom (US) e instrumentos rotatórios (IR) aplicados em superfícies radiculares. Material e método Cinquenta raízes bovinas foram preparadas e divididas aleatoriamente em 10 grupos (n = 5) nos quais a instrumentação com HI, US ou RI foi realizada com ou sem profilaxia usando pasta convencional ou hidroxiapatita a 3%; adicionalmente, um grupo controle sem tratamento foi incluído. As rugosidades de Ra e Rz foram medidas por um perfilômetro. Os aspectos morfológicos das superfícies radiculares foram analisados ​​qualitativamente por microscopia eletrônica de varredura (MEV). Os dados foram analisados ​​por meio de ANOVA de dois fatores, seguido pelo teste de Tukey (α = 0,05). Resultado O método de raspagem e o procedimento de profilaxia influenciaram significativamente (p <0,05) a rugosidade da superfície radicular. O tratamento com US e a profilaxia com pasta de hidroxiapatita ao 3% resultaram em menores valores de Ra (0,14 µm ± 0,02 µm) e Rz (0,89 µm ± 0,18 µm) em relação aos demais grupos. A análise por MEV mostrou superfícies mais lisas e mais homogêneas nos grupos com profilaxia em comparação aos grupos sem profilaxia. Não houve diferenças substanciais entre os resultados da aplicação das diferentes pastas. Conclusão O procedimento de profilaxia realizado com a pasta experimental contendo 3% de hidroxiapatita reduziu a rugosidade das superfícies radiculares tratadas com HI, US e RI no mesmo nível da pasta profilática convencional.

Use of micro-computed tomography for bone evaluation in dentistry

Abstract Micro computed tomography (µCT) follows the same principle of computed-tomography used for patients, however providing higher-resolution. Using a non-destructive approach, samples can be scanned, and each section obtained is used to build a volume using tridimensional reconstruction. For bone analysis, it is possible to obtain information about the tissue's microarchitecture and composition. According to the characteristics of the bone sample (e.g. human or animal origin, long or irregular shape, epiphysis or diaphysis region) the pre-scanning parameters must be defined. The resolution (i.e. voxel size) should be chosen taking into account the features that will be evaluated, and the necessity to identify inner structures (e.g. bone channels and osteocyte lacunae). The region of interest should be delimited, and the threshold that defines the bone tissue set in order to proceed with binarization to separate the voxels representing bone from the other structures (channels, resorption areas, and medullary space). Cancellous bone is evaluated by means of the trabeculae characteristics and their connectivity. The cortex is evaluated in relation to the thickness and porosity. Bone mineral density can also be measured, by the amount of hydroxyapatite. Other parameters such as structure-model-index, anisotropy, and fractal dimension can be assessed. In conclusion, intrinsic and extrinsic determinants of bone quality can be assessed by µCT. In dentistry, this method can be used for evaluating bone loss, alterations in bone metabolism, or the effects of using drugs that impair bone remodeling, and also to assess the success rate of bone repair or surgical procedures.

Resumo A microtomografia computadorizada segue o mesmo princípio da tomografia computadorizada utilizada para avaliação dos pacientes, mas neste caso, é empregada para pequenas amostras com alta resolução. De forma não destrutiva, as amostras podem ser escaneadas, e cada fatia obtida é organizada de forma seriada para formar um volume tridimensional (3D). Para análise óssea, é possível obter informações de microarquitetura e composição mineral, permitindo avaliação distinta entre diferentes sítios. De acordo com as características de cada amostra óssea, como amostras de humanos, animais, ossos longos ou achatados, epífise ou diáfise, etc, devem ser definidos os parâmetros pré-escaneamento com a resolução desejada, levando em consideração quais informações serão extraídas da avaliação. Depois do escaneamento e da reconstrução, deve-se proceder com a seleção da região de interesse (ROI), e depois seguir com o processo de binarização, que se caracteriza pela escolha de um limiar que define os voxels que compõem a região de osso e àqueles que compõem a região dos buracos (canais, áreas de reabsorção e espaço medular). No osso trabecular e no reparo os parâmetros avaliados se baseiam nas características das trabéculas e sua conectividade. No osso cortical os parâmetros estão relacionados com a espessura e porosidade. Além dos parâmetros de microarquitetura, também é possível avaliar a densidade mineral óssea, calculada por volume de hidroxiapatita. Outros parâmetros também podem ser mensurados, utilizando técnicas computacionais como a análise de textura. Parâmetros intrínsecos e extrínsecos da qualidade óssea podem ser avaliados pela microtomografia computadorizada. Na odontologia, este método pode ser empregado em estudos que objetivem avaliar doenças, alterações metabólicas e medicamentos com repercussão no metabolismo ósseo, e na avaliação do processo de reparo e de técnicas cirúrgicas.

A 12-Year Retrospective Study of Avulsion Cases in a Public Brazilian Dental Trauma Service

Abstract This study assessed the epidemiological characteristics and management of the permanent teeth avulsion cases attended in a Brazilian dental trauma service from December 2005 to August 2016. A retrospective study was conducted of case records of 93 patients involving 139 avulsed teeth. Data included sex, age, trauma etiology, location of the accident, number and position of avulsed teeth, and presence and type of associated traumatic lesions. Management of the avulsed teeth was addressed as: time elapsed until teeth were retrieved from the accident's location; teeth's cleaning method and storage media; time elapsed until seeking treatment and replantation. The majority of the patients were children from 6-10 (31.2%) and 11-15 years old (26.9%). Male patients were more affected than female. Bicycle accident was the main etiological factor (31.2%). In 56 (60.2%) cases, traumatic lesions to neighboring teeth were present. In 55 (59.1%) cases, lesions to adjacent soft tissues were reported. In 82 (88.2%) cases, patients requested treatment at the same day of the accident. Sixty-four teeth (46.0%) were immediately retrieved and 28 (20.1%) were not found. Forty-two teeth (30.2%) were kept dry. Only one tooth (0.7%) was immediately replanted at the accident's site, while 51 teeth (36.7%) were not replanted. Numerous avulsed teeth were inappropriately managed and immediate replantation was not frequent. Public policies must be created to raise awareness towards the particularities of avulsion cases.

Resumo Este estudo avaliou as características epidemiológicas e de manejo dos casos de avulsão de dentes permanentes atendidos em um serviço de trauma dental de dezembro de 2005 a agosto de 2016. Foi realizado um estudo retrospectivo de 93 casos, envolvendo 139 dentes avulsionados. Os dados incluíram sexo, idade, etiologia do trauma, localização do acidente, número e posição dos dentes avulsionados e presença e tipo de lesões traumáticas associadas. O manejo dos dentes foi abordado de modo a analisar: o tempo decorrido até que os dentes fossem recuperados do local do acidente; Método de limpeza dos dentes e meios de armazenamento; Tempo decorrido até a busca por tratamento e reimplante dental. A maioria dos pacientes eram crianças de 6-10 (31,2%) e 11-15 anos (26,9%). Os pacientes do sexo masculino foram mais acometidos que do feminino. O acidente de bicicleta foi o principal fator etiológico (31,2%). Em 56 (60,2%) casos, ocorreram lesões traumáticas aos dentes vizinhos. Em 55 (59,1%) casos foram relatadas lesões de tecidos moles. Em 82 (88,2%) casos, os pacientes solicitaram tratamento no mesmo dia do acidente. Sessenta e quatro dentes (46,0%) foram imediatamente recuperados e 28 (20,1%) não foram encontrados. Quarenta e dois dentes (30,2%) foram mantidos secos. Apenas um dente (0,7%) foi imediatamente reimplantado no local do acidente, enquanto 51 dentes (36,7%) não foram reimplantados. Numerosos dentes avulsionados foram manejados de forma inadequada e o reimplante imediato não foi frequente. Devem ser criadas políticas públicas para a conscientização da população sobre as particularidades dos casos de avulsão dental.

Morphological and morphometric features of nematode-cysts in Gymnotus inaequilabiatus liver in the Brazilian Pantanal / Características morfológicas e morfométricas de cistos de nematódeos em fígado de Gymnotus inaequilabiatus no Pantanal brasileiro

Abstract The aim of this study was to determine the morphometric measures and morphological aspects of nematode-cysts in Gymnotus inaequilabiatus, and the presence of melanomacrophage centers (MMCs) associated with the periphery of cysts and in the liver parenchyma. Adult specimens, 34 female (123.1 ± 43.9g) and 45 male (135.5 ± 43.4g), from Paraguay River, Corumbá, Brazil, were used. The number of nematode-cysts was determined in 79 livers and 25 of them randomly selected for histopathological analysis and morphometric measures of nematode-cysts (mean diameter, thickness of collagen layer, and cyst-wall layer). The percentage of cysts with MMCs on the periphery and density in the liver parenchyma was estimated. The average number of macroscopic cysts was of 48.7 ± 2.78. Granulomatous reaction was observed surrounding the cysts. Diameter, collagen layer and cyst-wall measurements were 293.0 ± 75.18 (µm), 17.72 ± 6.01 (µm) and 12.21 ± 9.51 (µm), respectively. The number of nematode-cysts was correlated with hepatosomatic index, (r=0.26, P<0.05). Collagen layer was correlated with cyst diameter (r=0.62, P<0.01). Pericystic and parenchymatous MMCs were moderately (r=0.48) and highly (r=0.90) correlated with nematode-cysts number. Morphological characteristics of hepatic tissue and cysts-nematodes measures suggest that G. inaequilabiatus acts as a paratenic host to nematodes in the larval stage.

Resumo O objetivo deste estudo foi determinar as características morfológicas e morfométricas de cistos de nematodas em fígado de Gymnotus inaequilabiatus, e a presença de centros de melanomacrófagos (CMMs) pericísticos e no parênquima hepático. Espécimes adultos, 34 fêmeas (123,1 ± 43,9 g) e 45 machos (135,5 ± 43,4g), provenientes do Rio Paraguai, Corumbá, Brasil foram utilizados. Os cistos foram quantificados em 79 fígados. Em 25 fígados foi realizada a análise histopatológica e morfometria dos cistos (diâmetro, espessura da camada de colágeno e da parede). Estimou-se a porcentagem de cistos com CMMs periférico e a densidade de CMMs no parênquima. A média de cistos macroscópicos foi de 48,7 ± 2,78. Observou-se reação granulomatosa pericística. O diâmetro, a espessura da camada de colágeno e da parede do cisto foi de 293,0 ± 75,18 (µm), 17,72 ± 6,01 (µm) e 12,21 ± 9,51 (µm), respectivamente. O número de cistos foi associado ao índice hepatossomático, (r=0,26, P <0,05). A camada de colágeno correlacionou-se com o diâmetro do cisto (r=0,62, P <0,01). CMMs pericísticos e do parênquima apresentaram correlação moderada (r=0,48) e alta (r=0,90) com o número de cistos, respectivamente. As características morfológicas do tecido hepático e a morfometria dos cistos de nematodas sugerem que G. inaequilabiatus atua como hospedeiro paratênico para larvas de nematodas.

Estética do sorriso: Planejamento digital, cirurgia periodontal e procedimento restaurador / Smile's esthetics: digital smile design, periodontal surgery and restorative procedure

A busca pela estética tem acentuado a procura dos pacientes pela transformação do sorriso. Com o auxílio da fotografia e da tecnologia computacional, é possível a realização do DSD (digital smile design ­ planejamento digital do sorriso), que nos dá maior previsibilidade do tratamento. A confirmação deste planejamento digital se dá na prova do mock-up, a partir do qual o paciente tem a real sensação do seu sorriso planejado. Este artigo apresentou um caso clínico no qual se destaca a adesão do paciente ao tratamento e a realização de cirurgia periodontal para aumento de coroa clínica, seguida de restaurações diretas com resinas compostas, posterior ao enceramento diagnóstico. Com o planejamento integrando a terapia cirúrgica periodontal e o protocolo restaurador adesivo direto guiado por planejamento digital (DSD), foi possível estabelecer um excelente resultado com uma elevada satisfação do paciente.

The seek for esthetics has increased patient´s demand for the smile makeover. With the help of computational technology, it is possible to perform the DSD (digital smile design) with greater treatment predictability treatment. Confirmation of this digital planning occurs in the mock-up test, from which the patient has a physical sensation of his/her planned smile. This article presents a clinical case which highlights the patient cooperation and periodontal surgery for crown lengthening, followed by direct composite resin restorations after the diagnostic wax-up procedure. With an integrated treatment planning guided by the DSD protocol, it was possible to establish an excellent outcome with high patient satisfaction.

Restaurações diretas em resina composta transcirúrgicas em dentes traumatizados: acompanhamento de série de casos na clínica de traumatismo dento-alveolar da FOUFU / Transurgical direct composite restoration in traumatized teeth: case series support of clínica de traumatismo dento-alveolar da FOUFU

Objetivo: apresentar caso clínico de restauração em resina composta transcirúrgica em dente com fratura dental, demonstrando desempenho clínico por proservação de até 2 anos de procedimentos transcirúrgicos realizados na Clínica de Traumatismo Dentoalveolar/FOUFU. Materiais e métodos: Foram avaliados 7 casos clínicos, do total de 21 casos de restauração transcirúrgica de fratura dento-alveolar realizados nos últimos 2 anos. Os acompanhamentos clínicos foram realizados 6 meses após os procedimentos transcirúrgicos descrevendo o uso de pinos de fibra de vidro, tracionamento ortodôntico, assim como presença de edema, profundidade de sondagem, sangramento gengival, lisura superficial e perfil de emergência da restauração, além da relação oclusal. Para ilustrar esta série de casos reavaliados, foi inserido relato de protocolo transcirúrgico restaurador direto, com restabelecimento de distância biológica, associada à cimentação de pino de vibra de vidro com acompanhamento de 4 anos. Resultados: Apenas 42% dos pacientes retornaram para acompanhamento. Exceto em pacientes com higiene oral deficiente, não foram relatados edema e sangramento gengival à sondagem. O perfil de emergência das restaurações apresentou- -se adequado, assim como o acabamento e polimento superficial. Conclusão: Restaurações diretas transcirúrgicas utilizando resinas compostas constituem opção confiável e economicamente viável para a restauração de dentes fraturados com invasão de espaço biológico, principalmente no ambiente do serviço público promove resultados eficazes. Esforços constantes precisam ser realizados para que os pacientes se conscientizem da necessidade de retornos periódicos para acompanhamento realizados em ambientes universitários onde o serviço está vinculado a geração de conhecimento.

Aim: present a case report of a transsurgical composite resin restoration in a fractured tooth, demonstrating clinical performance by proservation of up to 2 years of transsurgical procedures performed at the Dentoalveolar Trauma Clinic / FOUFU. Materials and methods: 7 clinical cases were evaluated, in a 21 total cases of transsurgical restoration of dentoalveolar fractures performed in the last 2 years. The clinical follow-ups were realized 6 months after the transsurgical procedures describing the use of glass fiber posts, orthodontic traction, as the presence of edema, probing pocket depth, gingival bleeding index, surface smoothness and emergence profile of restoration, also occlusal relationship. To illustrate this reavaluated case series, it was inserted a report of a direct transsurgical restorative protocol, with reestablishment of biological distance associated with cementation of glass fiber post with 4 years of follow-up. Results: Only 42% of pacients return to follow-up. Except in pacients with poor oral hygiene, it was not report edema or bleeding on probing. The emergence profile of restorations presented appropriate as the superficial finishing and polishing. Conclusion: Transsurgical direct restorations using composite resins are a confinable option and viable economical for restoration of fracture tooth with invasion of biological space, mainly in public service it can promote effective results. Constants efforts need to be realized for the conscientization of the patients of the periodical return for follow-up made in universitary environment where the service ar connect with knowledge generation.

Effect of Gamma Radiation and Endodontic Treatment on Mechanical Properties of Human and Bovine Root Dentin

Abstract This study evaluated the effect of gamma radiation and endodontic treatment on the microhardness and flexural strength of human and bovine root dentin. Forty single-rooted human teeth and forty bovine incisor teeth were collected, cleaned and stored in distilled water at 4 °C. The human and bovine teeth were divided into 4 groups (n=10) resulting from the combination of two study factors: first, regarding the endodontic treatment in 2 levels: with or without endodontic treatment; and second, radiotherapy in two levels: with or without radiotherapy by 60 Gy of Co-60 gamma radiation fractioned into 2 Gy daily doses five days per week. Each tooth was longitudinally sectioned in two parts; one-half was used for the three-point bending test and the other for the Knoop hardness test (KHN). Data were analyzed by 3-way ANOVA and Tukey HSD test (α=0.05). No significant difference was found for flexural strength values. The human dentin had significantly higher KHN than the bovine. The endodontic treatment and radiotherapy resulted in significantly lower KHN irrespective of tooth origin. The results indicated that the radiotherapy had deleterious effects on the microhardness of human and bovine dentin and this effect is increased by the interaction with endodontic therapy. The endodontic treatment adds additional negative effect on the mechanical properties of radiated tooth dentin; the restorative protocols should be designed taking into account this effect.

Resumo Este estudo avaliou o efeito da irradiação gama e tratamento endodôntico na microdureza e resistência à flexão de dentina radicular humana e bovina. Quarenta dentes humanos unirradiculares e quarenta dentes incisivos bovinos foram coletados, limpos e armazenados em água destilada a 4 °C. Os dentes humanos e bovinos foram divididos em 4 grupos (n=10) gerados pela combinação de dois fatores de estudo: tratamento endodôntico em 2 níveis: com ou sem tratamento endodôntico; e radioterapia em dois níveis: com ou sem radioterapia utilizando 60 Gy de radiação gama de Co-60 fracionado em 2 Gy por dia, cinco dias por semana. Cada dente recebeu um corte longitudinal, resultando em duas metades por raiz, sendo uma metade utilizada para o ensaio de flexão de três pontos e a outra para o teste de dureza Knoop (KHN). Os dados foram analisados por ANOVA e teste de Tukey (α=0,05). Nenhuma diferença estatística foi encontrada para todos os fatores de resistência à flexão. A dentina humana teve KHN significativamente maior do que a dentina bovina. O tratamento endodôntico e radioterapia resultaram em significativa menor KHN, independentemente do tipo de dente. Os resultados indicaram que a radioterapia produziu efeitos deletérios sobre a microdureza da dentina humana e bovina e este efeito é exacerbado pela interação com a terapia endodôntica. O tratamento endodôntico causou efeito negativo adicional à radioterapia nas propriedades mecânicas da dentina. Este aspecto deve ser considerado no momento de se restaurar dentes tratados endodonticamente que receberam terapia endodôntica

Reabilitação maxilar após radioterapia utilizando implante unitário e prótese obturadora tipo overdenture: acompanhamento clínico de um ano / Maxillary rehabilitation after radiotherapy using a single-tooth dental implant and the obturator-type overdenture: one-year clinical follow-up

Este caso clínico relata o uso de uma prótese obturadora tipo overdenture para compensar a deficiência estética em um paciente previamente irradiado. Um indivíduo do sexo masculino, 73 anos de idade, que possuía uma prótese sobre três implantes dentários foi acometido de câncer no seio maxilar e assoalho da órbita. Seis doses de cisplatina e 35 sessões de radioterapia (dose diária 1,8 Gy) foram executadas. Após a maxilectomia, apenas um implante restou na região anterior. O tratamento consistiu de uma prótese obturadora tipo overdenture com encaixe tipo Equator. O paciente retornou um ano depois, sem alterações estéticas e com nível de satisfação melhorado. Entretanto, o anel borrachoide do encaixe foi trocado. Reabilitações implantossuportadas e mucorretidas que recebem carregamento tardio pode melhorar o prognóstico de implantes dentais em pacientes irradiados. Este cuidado mostra que este cenário ainda requer maior atenção da comunidade científica, na busca por meios de prevenir e minimizar os danos causados pela radioterapia, por inovações tecnológicas e protocolos regenerativos que potencializem a osseointegração. Com isso, a Odontologia poderá contribuir ainda mais com a melhora da qualidade de vida de pacientes, devolvendo satisfação pessoal e autoestima.

This case describes the use of an obturator-type overdenture prosthesis to compensate for the aesthetic defi ciency in a previously irradiated patient. A 73 years-old male, who had a prosthesis on three dental implants was diagnosed with cancer in the maxillary sinus and orbital floor. Six doses of cisplatin and 35 radiotherapy sessions (daily doses of 1.8 Gy) were performed. After maxillectomy, only one implant survived in the anterior region. The treatment consisted of an obturator overdenture with the Equator attachment. The patient returned one year later without cosmetic changes and demonstrated an enhanced satisfaction level. However, the o-ring rubber was replaced. Implant-supported, mucosa-retained restorations receiving delayed loading can improve the prognosis of dental implants in irradiated patients. Also, this scenario still requires more attention from the scientific community seeking for new ways to prevent and minimize damages caused by radiation, technological innovations, and regenerative protocols that enhance osseointegration. Thus, dentistry can further contribute to improving the quality of life of patients, returning their personal satisfaction and self-esteem.

Evaluation of coconut water neutralized by different agents on the viability of human fibroblasts: an in vitro study / Avaliação da água de coco neutralizada por diferentes agentes na viabilidade de fibroblastos humanos: estudo in vitro

Objective: This study evaluated four types of pH adjustment of the coconut water (CW) on viability of human fibroblasts (HFF). Material and method: Natural and industrialized CW were adjusted to pH 7.0 using: (1) Sodium Hidroxide (NaOH), (2) Sodium bicarbonate (NaHCO3), (3) Triethanolamine (C6H15NO3), (4) 2-Amino-2-Methil-1-Propanol (C4H11NO). Fibroblasts were plated at 2×104/ well in 96 well plates and maintained in the CW solutions for 2 h and 4 h. Positive control was represented by HFF maintained in DMEM and the negative control by tap water. Cell viability was analyzed by MTT formazan method. Data were analyzed by 3-way ANOVA followed by Tukey's and Dunnet's test. Result: There are no significant effect on the cell viability regarding type of CW, period of evaluation, and the interactions between CW and period of evaluation, CW and pH adjustment method, pH adjustment method and period of evaluation (p>0.05). Conclusion The product used for CW pH adjustment did not influenced HFF viability, thought there are a tendency of better performance in natural CW.

Objetivo: Avaliar a eficácia de quatro tipos de substâncias usadas para ajuste do pH da água de coco (AC) sobre a viabilidade de fibroblastos humanos (HFF). Material e método: O pH da AC natural e industrializada foi ajustado para pH 7,0 utilizando: (1) Hidróxido de Sódio (NaOH), (2) bicarbonato de sódio (NaHCO3), (3) Trietanolamina (C6H15NO3), (4) 2-Amino-2- Methil-1-propanol (C4H11NO). Células HFF foram plaqueadas em 2×104 células/poço em placas de 96 poços e mantidas nas diferentes soluções de AC acima durante 2 h e 4 h. Controle positivo foi representado por HFF mantidas em DMEM e o controle negativo por água da torneira. A viabilidade celular foi avaliada pelo método de MTT Formazan. Os dados foram analisados por 3-way ANOVA seguido pelo teste de Tukey e Dunnett. Resultado: A viabilidade celular não é influenciada pelo período de avaliação, e as interações entre AC e período de avaliação, AC e método de ajuste de pH, método de ajuste de pH e período de avaliação (p> 0,05). Conclusão: O produto utilizado para ajuste do pH não interfere na viabilidade de FH, embora, haja uma tendência de melhor desempenho em AC natural.